900 WORKHORSE GENERAL PURPOSE ADHESIVE
Latex-based economy-grade floor covering adhesive developed for the installation of many types of carpets and sheet goods designed for direct glue down, excluding those with vinyl backings.
Taylor 900 is freeze-thaw stable, easy to spread, and has ample open time, a strong wet tack, and a permanent water resistant bond. Do not use outdoors.
Quick Overview 100 blades in 10 dispensers per box. Manufactured by Floor Dot, who is quickly becoming the industry leader in carpet blades.
ROBERTS 3000
Roberts 3000 is a carpet and sheet vinyl adhesive developed with a longer open time for the optimal positioning of felt-back vinyl flooring while it will also develop tack for the installation of most types of commercial carpets.
- Residential to light commercial-grade
- Good positioning time for felt-back sheet vinyl
- Longer open time
- Solvent-Free
DRITAC 6200
DriTac 6200 Premium Pressure Sensitive Flooring Adhesive is the most proven and time-tested adhesive for installing wood flooring, cork and vinyl tile, cork underlayments and other approved underlayments.
With the tremendous popularity of Luxury Vinyl Tile and Luxury Vinyl Plank, DriTac is pleased to recommend DriTac 6200 for installing the following LVT flooring products:
- Luxury Vinyl Tile
- Luxury Vinyl Plank
DRITAC 9100
DriTac 9100 Contractors Choice High Solids Wood Flooring Adhesive is a Polymeric Resin that has been formulated for wet-lay installations.
DriTac 9100 Contractors Choice is a professional grade adhesive that spreads easily and cleans up with a damp rag. Installers must lay wood into the adhesive immediately after troweling the adhesive.
DriTac 9100 Contractors Choice has low VOC content, is fast grabbing and low in odor.
DRITAC 7600
DriTac 7600 is the most advanced premium urethane wood flooring adhesive. DriTac 7600 Premium Urethane Adhesive provides high initial tack, low odor and excellent permanent adhesion.
DriTac 7600 Urethane adhesive is VOC compliant, easy to trowel, provides superior coverage and has excellent ridging. It is recommended by installers for both residential and commercial installations.
DRITAC “GREEN” ENGINEERED WOOD FLOOR REPAIR KIT
DriTac has developed a repair system to correct the hollow spots and popping conditions for engineered wood flooring installations when other adhesives fail to get the job done.
These defects cost the flooring industry millions of dollars per year. Studies and experience show that a major cause of these problems for engineered wood floor installations are adhesive voids between the flooring and the subfloor.
ECO 711
Ultrabond ECO 711 has been reformulated to provide even faster dry times, enhanced grab and greater slip resistance.
Now a FastTrack Ready™ product, Ultrabond ECO 711 has been formulated for higher moisture resistance, making it suitable for use over fresh concrete slabs with moisture vapor emission rates (MVERs) up to 8 lbs. per 1,000 sq. ft. (3,63 kg per 92,9 m2) per 24 hours.
ECO 575
Ultrabond ECO 575 is a premium wall-base adhesive specifically designed to provide superior bond and impact resistance for rubber, vinyl and carpet wall base.
Ultrabond ECO 575 also has been recently reformulated to offer even greater grab and wet strength, keeping corners wrapped tight. Its acrylic-based, light-colored formulation won’t stain even the whitest wall base.
In addition, Ultrabond ECO 575 can be used to install various types of carpet in vertical/wall applications.
ULTRABOND ECO 975
Ultrabond ECO 975 capitalizes on MAPEI’s Ultralite Technology™ to provide a lightweight, 100%-solids, one-component moisture-cured urethane adhesive specifically designed for the installation of engineered wood flooring.
Ultrabond ECO 975 reduces the pail weight by approximately 33% and yet provides similar coverage when compared with traditional urethane products.
Ultrabond ECO 975 is easier to trowel, has excellent trowel-ridge hold, provides quick grab and offers excellent final bond strength.
ROBERTS 2057
Roberts ® 2057 is a clear thin spread adhesive designed for the installation of vinyl composition tile (VCT).
Features:
• Dries clear for visible chalk lines
• Good residual tack
• Extended working time
FAST LOCK
Latex-Based, Carpet Seam Sealer is specially formulated to prevent edge raveling and seal seams of most residential carpet.
Fast Lock is compatible with most carpet backings. (Open Time: 10 minutes)
For Use With:
- Carpet Seams
- Carpet Edging
- Upholstery – Drapery
- Fabric Laminating
STAUF 930
Alcohol Based Wood Flooring Adhesive. Superior “Green Grab” unmatched by any other adhesive. Contains no chlorinated solvents.
Eliminates hollow spots under wood flooring.
Easily spread and cleaned
ROBERTS 1404
Roberts 1404 is an adhesive specifically designed to adhere 3, 5 and 7-ply engineered wood flooring and pre-finished parquet.
It develops an initial tack to assist in holding boards in place during installation which makes installation easier. It remains flexible and moves with wood as it reacts to environmental changes.
Dries clear for visible chalk lines
Good residual tack
Extended working time
Roberts 7350
Roberts 7350 is a clear set, solvent free, pressure sensitive adhesive made for the interior installation of asphalt and vinyl composition tile (VCT) and closed-cell foam-back hardwood parquet over approved substrates.
This adhesive was formulated to be fast drying for quick installation. Tiles can be installed up to 24 hours after initial drying if the area remains dust and dirt free.
Product has excellent moisture resistance – up to 5.0 lbs./1000 sq. ft./24 hours (2.27 kg/92.9 m2/24 hours) using an anhydrous calcium chloride moisture test according to ASTM F-1869 method.
Roberts 7350 is a solvent-free, low-odor adhesive that meets all Federal, State and local government indoor air quality regulations. Do not use to install solid vinyl backed flooring.
TAYLOR 720
Anchors carpet padding to any surface, effectively preventing slippage during power stretching.
Dries fast, no tools or preparation are needed.
Caution: Extremely flammable – for professional use only
M260
Solvent-based, Flammable Carpet Pad Cement is specially formulated to quickly and permanently bond most residential and commercial carpet padding.
It is fast setting and waterproof and allows for stretching of carpet without carpet cushion wrinkling and slippage. (Open Time: 10 minutes)
- For the following pad types:
- Rebond Urethane
- Sponge Rubber
- Synthetic Hair & Jute
- Prime Urethane
- Foam Rubber
- Frothed Urethane
- Hair & Jute